Apollo Model BA12 -
|
|
| The Apollo BA12 Barrier Arm Operator is designed to handle a barrier arm up to 16 feet in length. |
Supporting
Documents
Product Brochure/Specs
Manual
|
DC Solutions MADCBB3 -
|
|
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Arm Manual
Mega Arm Brochure
|
DC Solutions MASDCBB3 -
|
|
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.
UNIT OVERVIEW
Fast access - very quick 1 second open/close time.
Built in battery backup - inherent 24 VDC backup power with regulated 24VDC for accessories.
High torque 24 volt Permanent Magnet DC motor.
Full service controller with eight inputs and LED indicators for loops, card reader, radio, etc...
Continuous duty operation toll rated at 10,000 cycles per day for all applications (even during power failures).
Reversible arm direction for right or left handed operation.
Instant Reverse Device (IRD) monitor senses obstructions going open and close.
Automatic open of gate arm when power is lost if desired (With 15 sec. delay selection).
Raise gate input memory will memorize multiple vehicles-ideal for barcode scanners & AVI.
Ability to have arm STOP in close travel if tailgating is sensed at close loop.
Break away mounting design for the 4" x 9 Ft. soft padded aluminum safety arm (yellow).
All rust proof aluminum construction with powder coat baked on enamel.
Molded Polyethylene UV stabilized cover never needs wax or paint (white or colors).
Direct drive gear reducer eliminates many parts that might otherwise fail.
Microprocessor (RISC) based electronics with watch dog reset timer.
State of the art MOSFET motor drive technology, NO contactors or relays.
Dynamic motor braking to preserve arm positioning.
Soft start and stop in open and close travel motions.
No limit switches to fail-uses magnetic (Hall Effect) sensors to monitor arm position.
Maximum Run Timer for motor (MRT) with anti-tamper protection in closing direction.
Each unit configurable as master or slave operator.
Safe 24 VDC low voltage motor and control wiring.
LED diagnostic center for easy on-site trouble shooting.
Closing timer adjustable f |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Sprint Manual
|
FAAC 615 -
|
|
The model 615 barriers are designed for light to moderate duty applications.
Features:
Adjustable hydraulic pressures to control swing
External key-operated manual release
Simple interface with revenue control systems
Powder coated steel cabinet
Versatile Model 455 D control panel
Quiet operation |
FAAC 620 -
|
|
The U.L. Listed model 620 barrier gates are designed for moderate to heavy duty applications.
The 620 is shipped with the model 624 mps control panel and has the following features:
Continuous duty operation
Adjustable hydraulic pressures
4 different operating logics
Pre-assembled counterbalanced system
Automated fan cooling on all models
Pause time seslections
Selectable warning light logic
Quiet operatio
Fast opening time (2 sec. for 8 .5 ft beam) |
Supporting
Documents
Product Brochure/Specs
Manual
|
FAAC 640 -
|
|
The U.L. listed model 640 barrier gates are designed for high traffic situations where longer beams are needed. The 640 is shipped with 624 mps control panel.
Features:
Continuous duty operation
Adjustable hydraulic pressures to control swing
4 different operating logics
Pre-assembled counterbalanced system
Automated fan cooling on all models
Pause time selections
Selectable warning light logic
Quiet operation |
Supporting
Documents
Product Brochure/Specs
Manual
|
Linear OSCO BGU -
|
|
| The model BGU barrier gate is designed to control vehicular traffic and can be actuated by different devices, such as radio controls, single- and three- button control stations, digital keypads, coded cards, sensing loops, telephone entry systems, revenue control equipment, ect. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Linear OSCO BGU-D -
|
|
| The model BGU-D barrier gate is desinged to control vehicular traffic and be actuated by different devices such as radio controls, single- and three- button control stations, digital keypads, coded cards, sensing loops, telephone entry systems, revenue control equipment, ect. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Linear OSCO SG -
|
|
| The model SG barrier Security Gate with Wishbone Arm was desinged for Secure Control of Large Vehicular Traffic. The gate can be actuated by different devices, such as radio controls, single- and three- button control stations, digital keypads, coded cars, sensing loops, and telephone entry systems. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Magnetic Autocontrol Magstop MTS6 & MTS8 Barrier -
|
|
|
|
Click on a picture to
see a larger view. |
Liftmaster BG790 - Industrial Duty Wishbone Arm -
|
|
When an application calls for a barrier gate, LiftMaster´s BG790 has the reliability and features you require for a commercial installation. The BG790 can be utilized in a high traffic area or integrated with another style gate to create a trap, preventing additional cars from entering a specified area prior to the previous car leaving.
The BG790 is provided by LiftMasterŽ with a 24-foot wishbone-style arm. Whether the operator is used individually or when utilizing the standard master/slave feature, the BG790 will cover the majority of installations from 24 to 48 feet wide. For smaller entranceways, please see our BG770 Barrier Gate Operator that supports a 12-foot standard arm.
LiftMaster´s parking gates are designed for long life and durability. The weatherproof cabinet is composed of heavy-duty 11-gauge pre-galvanized steel and is baked with a powder coat finish. A continuous duty 1/3 hp industrial motor, with overload protection, is standard to withstand heavy usage and promote low maintenance.
STANDARD FEATURES
Full Systems Capability
Security Loops
Secondary Obstruction Sensing
Multi-Gate Operation
Gate Movement Warning
Obstruction Sensing Alarm
Accessory Power
Removable Electrical Controls
Remote Device Connections
Access Panels
On/Off Switch
Control Station
Automatic/Manual Switch |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Liftmaster BG790 Manual
|
Liftmaster BG770 - Industrial Duty Single Arm -
|
|
The LiftMasterŽ BG770 offers reliable performance barrier gate operator for industrial applications such as airports, parking garages, and manufacturing plants. Engineered for the highest durability and safety, this powerfully designed barrier gate operator supports arm lengths up to 12 feet and arms weighing up to 25 pounds. Heavy 11-gauge steel weather-resistant cabinet with a durable baked-on powder-coated finish and a continuous-duty 1/2 HP industrial motor with overload protection supports 100 cycles per hour, making this model ideal for installations that experience heavy traffic.
STANDARD FEATURES
Dual gate operation
Control inputs
Limit settings
2 year warranty
OPTIONAL ACCESSORIES
Timer to close
Plug-in loop detectors
Long distance wiring module |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Liftmaster BG770 Manaul
|
