ALL-O-MATIC Swinger 300 -
|
|
Specifications:
UL 325 & UL 991 Approved
Full Five and Seven year Warranty
Motor - 1/2 hp
Gear Box - 60:1 with Internal Clutch
Cover is rotationally molded, indestructible
Dimensions: W: 12" - L: 17." - H: 25.5"
Gates up to 18 feet
Gates up to 800 lbs
Operator Weight - 110 lbs
Power off quick release arm
Five to Seven Year Warranty:
ALL-O-MATIC, Inc. gate operators are warranted against defects in materials and workmanship for five years Commercial and seven years Residential. Any part, parts or complete unit found to be defective within this period shall, at the manufacturer's option, be repaired or replaced free of charges, F.O.B. our factory.
The above warranty is in lieu of all other warranties, expressed or implied, and shall be considered void if visible evidence implies recommended installation procedures and maintenance instructions were not followed.
|
|
Click on a picture to
see a larger view. |
Apollo Models 3500ETL 3600ETL -
|
|
Apollo offers its articulating arm swing gate operators in two models the 3500ETL and 3600ETL (daul). Both models are easily installed on most existing or new swing gate. Both operators have a new arm design that eliminates major pinch points. This operator is perfect for heavy duty commercial or residential continuous operation. This operator has a low profile and is post mounted.
The 3500ETL will operate gates up to 20 feet long and 1000 pounds.
The 3500ETL and 3600ETL (dual) utilizes our advanced circuit board 835/836. The 835 single and the 836 dual circuit boards offer additional inputs for a firebox, output monitor lights, lock, siren and strobe lights. |
Supporting
Documents
Product Brochure/Specs
Manual
|
DC Solutions MSWDCBB3 -
|
|
The MEGA SWING-UL by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for motor relays and contactors. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, etc... Built in regulated 24VDC backed up power provided for accessories (detectors, radio receivers, card readers, mag-lock). Should AC power fail, the unit can run on battery power or be set to auto-open with a 15 second delay. In the unlikely event the unit should be rendered inoperable (fire, flood, lightning), the drive arm assembly can be disengaged so the gate can be pushed open by hand. Finally, its rugged modern design and cutting edge technology will make the MEGA SWING-UL the perfect choice for all your swing gate applications.
STANDARD FEATURES
BUILT IN BATTERY BACKUP POWER SOURCE
HIGH TORQUE 1/2 HP 24 VOLT DC MOTOR
MICROPROCESSOR (RISC) CONTROL BOARD
OPEN ON POWER LOSS WITH 15 SEC. DELAY
ANTI-TAIL GATE WITH QUICK CLOSE FEATURE
MOLDED Polyethylene COVER-UV STABLE
UNIQUE "CLAM SHELL" COVER DESIGN
IRD SENSES OPEN AND CLOSE OBSTRUCTIONS
RUST PROOF ALUMINUM ALLOY CHASSIS
SOFT START AND STOP WHEN IN MOTION
13-15 SECOND OPEN/CLOSE TIME
DYNAMIC MOTOR BRAKING-ELECTRONIC
CONFIGURABLE AS MASTER OR SLAVE
LED INPUT AND DIAGNOSTIC INDICATORS
MOSFET MOTOR DRIVE-NO CONTACTORS
SAFE LOW VOLTAGE CONTROL CIRCUITRY
MAXIMUM RUN TIMER (MRT)
U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
UL-325, UL-991, UL-746C
CLASS, 1,2,3,4.
DESIGN FEATURES
EMERGENCY RELEASE (HARDENED STAINLESS STEEL)
NON-SCISSOR ARM DESIGN
UNIVERSAL CONTROLLER WITH 8 INPUTS
INPUTS INCLUDE: OPEN, CLOSE, SINGLE BUTTON, SAFETY, FREE EXIT & SHADOW (UNDER GATE LOOP)
MICROPROCESSOR (RISC) ELECTRONICS
RIGHT OR LEFT HANDED OPERATION
ANTI-TAILGATE & QUICK CLOSE FEATURE
ABILITY TO AUTO OPEN WHEN POWER FAILS
TRANZORB SURGE PROTECTION ON INPUTS
CLOSING TIMER ADJUSTABLE 1-33 SECONDS
RELAY MAG-LOCK OR INTERFACE
OPEN/CLOSE 13-15 SECONDS
ROOM FOR FUTURE OVERDRIVE CPU
EXTRA LARGE ENCLOSURE FOR DETECTORS, BATTERIES
SPECIFICATIONS
1/2 HP PERMANENT MAGNET 24 VDC MOTOR
110 1220 VAC AT 4 / 2 AMPS MAX, 50/60 HZ
REGULATED 24VDC 500 MA ACCESSORY POWER
BATTERY BACKUP FOR ACCESSORY POWER
CONTINUOUS DUTY (FREE MOVING LEVEL GATE)
HEAVY DUTY SIZE 80 900:1 RATIO GEAR REDUCER
MAX 600 LBS AT 18 FT
COVER: GREY HIGH IMPACT Polyethylene
CHASSIS: 3/8 INCH T6 ALUMINUM ALLOY
CHASSIS FINISH: GLOSS WHITE POWDER COAT
ALL ALUMINUM DRIVE ARM
PHYSICAL: WEIGHT= 105 LBS. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Swing - UL Manual
Mega Swing - UL Brochure
|
Elite CSW200UL3 -
|
|
Commercial Swing Gate operator for use in high traffic applications,our most popular swing gate operator.
The CSW2000UL3 is designed for high traffic applications such as heavily accessed gated communities and commercial buildings. It is capable of handling gates up to 600 lbs. and 18' at 75 cycles per hour with normal ambient temperatures. The most popular of all swing gate operating systems nationwide, it is designed with the "non-scissor action" arms that greatly reduce the risk of injury.
MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications.
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal.
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance.
Cycles 75 cycles per hour with a 600 pound gate.
Dimensions Length = 20.5in x Width = 15in x Height 28in.
Emergency Release The gate is easily disconnected by turning the release handle. the best option is our DC-1000CSW.
Finish All metal parts are gold zinc plated for rust proof protection.
Gate Length 18 feet maximum gate length.
Motor 1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings.
Output Shaft 2.5 inch cold rolled steel.
Shipping Weight 175 lbs.
Travel Speed 90° opening in 13-15 seconds.
Weight 160 pounds.
Weight Capacity 600 pounds maximum gate weight.
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
CSW Manual
CSW DC/Surge Manual
CSW Specs Manual
|
FAAC 400 -
|
|
| The Model 400 heavy duty operator is designed specifically for situations needing maximum versatility such as apartment, subdivision, commercial/industrial and residential applications. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Linear OSCO SW Series -
|
|
The SW Series have Commercial and Residential swing gate operators to choose from.
Features:
Crank style
Granite,black or tan polyethylene covers
Pad mount standard;post mount optional
Exterior reset button
UL325/UL991 compliant 24 vdc control board
|
Supporting
Documents
Product Brochure/Specs
Manual
|
Linear OSCO SWG -
|
|
The model SWG is a Commercial swing crank style operator.
Features:
1/2,3/4 or 1hp motor
All voltages,single or three-phase
Powder coat finish
Post mount standard;pad mount optional
C-face direct to gear box design |
Supporting
Documents
Product Brochure/Specs
Manual
|
Linear OSCO VS-GSWG -
|
|
The model VS-GSWG is a variable speed industrial for large/heavy swing gates.
Features:
Continuous-duty industrial motor,1/2,1 or 2hp
Linear drive arm - for positive security
Full variable speed
Soft start/soft stop capability
All voltages, single or three-phase
Powder coat finish
Post mount standard; pad mount optional |
Supporting
Documents
Product Brochure/Specs
Manual
|
Viking F1 -
|
|
The standard specifications and features of the F1 swing gate operator showcase the commitment made in its concept and design. Whether it's the simple, clean installation, energy efficient operation, or advanced battery backup function, this operator stands alone in it's class.
Residential and Commercial use. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Viking G5 -
|
|
With its compact, low profile design and the power to support 700lbs of weight along with gate lengths of up to 16 feet, the Viking G5 will revolutionize the idea of gate operation. This operator is manufactured with the highest quality components and is designed to accent any gate style. The G5 is capable of continuous cycles operation at 24v dc, converted directly from an AC line. The battery back-up provides up to 400 cycles of operation with a maximum capacity gate.
Residential and Commercial use. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Viking I8 -
|
|
The answer for an elegant solution for access control is fulfilled with the I8 gate operator. The discreteness of the installation, the flexibibility of operator, the efficiency of automation, and the adaptability of integration makes the I8 gate operator a perfect solution in situations where aesthetics are required to satisfy the most exquisite taste.
Commercial and Residential use |
Supporting
Documents
Product Brochure/Specs
Manual
|
Viking X9 -
|
|
The standard specifications and features of the X9 gate operator showcase the commitment made in its concept and design. Whether it's the simple, clean installation, energy efficient operation, or advanced battery backup function, this operator stands alone in its class. Included with the standard package are high quality direct burial cable, the complete control center and the X9 operator.
Commercial and Residential use. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Elite CSW200ULST3 -
|
|
High Traffic Commercial Gate Operator with robust stainless steel cover.
The CSW200ULST3 offers the same CSW-200-UL machine with a stainless steel cover option. This operator is equipped with a robust, 16 gauge, powder coated stainless steel cover, finished with an embossed architectural design. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Elite CSW-200-UL-ST Manual
|
Elite CSW200 UL DM -
|
|
Commercial Swing Gate Operator with two 1/2 hp motors. One motor opens the gate, the other closes it.
The CSW-200-UL-DM™ uses a unique, patented, dual motor feature. One motor opens the gate and the other one closes it, unlike any other operator in the world. Because of this feature the operator can function in less than ideal conditions, such as desert environments, and not overheat the motors. The CSW-200-UL-DM™ is specified for use at heavily accessed high traffic areas such as multiple family communities with 250 or more homes in high ambient temperature applications.
MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications.
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal.
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance.
Dimensions Length = 24.5in x Width = 15in x Height = 285in
Emergency Release Can be easily disconnected ty turning the emergency handle 180°. The best option is our DC-1000.
Finish All metal parts are gold zinc plated for rust proof protection.
Gate Length 18 feet maximum gate length.
Motor Equipped with two 4.7 AMP, 115VAC, 1/2hp instant reversing motors. One motor opens the gate, the other closes it.
Output Shaft 2.5 inch cold rolled steel.
Shipping Weight 199 pounds.
Swing Arm Non-scissor type arm action.
Travel Speed 90° opening in 13-15 seconds.
Weight Capacity 800 pounds maximum gate weight.
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Elite CSW200 UL DM (Surge/DC) Manual
|
Elite CSW200UL1HP3 -
|
|
Commercial Swing Gate Operator with two 1/2 hp motors that work in conjunction giving this machine 1hp for use on heavy gates.
The CSW200UL1HP3 is our most powerful swing gate operator. It is designed for large, heavy gates on condominiums and commercial buildings. It delivers 250 pounds of pulling torque and is capable of 60 cycles per hour on gates up to 1000 pounds and 20 feet in length. The unit is equipped with two 1/2 hp motors which operate a heavy duty double transmittion with a 900 to 1 ratio.
MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications.
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal.
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance.
Cycles Capable of 60 cycles per hour.
Dimensions Length = 24.5in x Width = 15in x Height = 285in
Emergency Release Can be easily disconnected ty turning the emergency handle 180°.
Finish All metal parts are gold zinc plated for rust proof protection.
Gate Length 20 foot gate length, max.
Motor Equipped with two 4.7 AMP, 115VAC, 1/2hp instant reversing motors that work together, equalling 1hp.
Output Shaft 2.5 inch cold rolled steel.
Shipping Weight 199 pounds.
Swing Arm Non-scissor type arm action.
Travel Speed 90° opening in 13-15 seconds.
Weight Capacity 1000 pounds.
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Elite CSW200 UL 1HP (no surge) Manual
Elite CSW200 UL 1HP (surge) Manual
Elite CSW200 UL 1HP Specs Manual
|
Liftmaster SW425 - Light Duty -
|
|
This DC-powered system features soft start/soft stop operation for mechanical parts protection via a prewired, solid state control system. Optional equipment includes battery-run as well as solar packages that are configurable to meet your power needs. Designed to support a maximum gate weight of 300 pounds and maximum gate length of 13 feet. Two year Warranty.
FULL SYSTEMS CAPABILITY CIRCUIT BOARD
Built-in fully adjustable timer to close
Adjustable gate sensitivity feature
Fully adjustable inherent obstruction detection system
LED to ease installation and speed diagnostics
Safety inputs
STANDARD FEATURES
DC-based operator
Inherent obstruction sensing
External obstruction sensing
Control inputs
Single/dual gate operation
Electronic braking
Timer to close
Maximum run timer
LED indicators
Limit switches
External manual disconnect
Post mount |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Liftmaster SW425 Manual
|
Liftmaster SW490 - Heavy Industrial Duty -
|
|
The LiftMaster® SW490 offers powerful performance for high cylce and heavy industrial swing gate applications. This hefty design supports gate lengths up to 22 feet and gate weights up to 1,000 pounds. Utilizing a weather-resistant powder-coated steel enclosure, a worm gear reduction drive, and high-starting torque motor, the SW490 offers you years of reliable and powerful performance. This model is ideal for demanding industrial applications and is fully UL325-compliant.
STANDARD FEATURES
External obstruction sensing
Advanced dual gate operation
Sequenced access management
Digital logic control
LED indicators
Warning device
Loop detector inputs
Timer to close
Maximum run timer
Emergency stop button
Maglock control
Gear drive reduction
Control inputs
Limit settings
Surge & spike protection
Manual disconnect
Removable access control panel
2 year warranty |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Liftmaster SW490 (S3)
Liftmaster SW490 (GL)
|
Liftmaster SW470 - Medium Duty -
|
|
The LiftMaster® SW470 is a heavy-duty commercial swing gate operator for use in high-cycle applications such as gated communities and commercial access. Supporting gate lengths up to 12 feet, gate weights up to 500 pounds and utilizing a weather-resistant powder-coated steel enclosure, the SW470 ensures rugged and reliable performance. This model is ideal for commercial applications and is fully UL325-compliant.
STANDARD FEATURES
Inherent obstruction sensing
External obstruction sensing
Advanced dual gate operation
Sequenced access management
Digital logic control
LED indicators
Warning device
Loop detector inputs
Timer to close
Maximum run timer
Emergency stop button
Maglock control
Gear drive reduction
Control inputs
Limit settings
Surge & spike protection
Manual disconnect
Removable access control panel
2 year warranty |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Liftmaster SW470 (S3) Manual
Liftmaster SW470 (GL) Manual
|
Liftmaster SW420 - Light Duty -
|
|
A reliable gear-driven swing gate operator for residential applications, the LiftMaster® SW420 offers a compact design that supports gate lengths up to 12 feet and gate weights up to 300 pounds. Powder-coated weather-resistant steel enclosure and a high-starting torque motor with built-in overload protection ensure strong, dependable performance. This model is ideal for residential installations and is UL325 compliant.
STANDARD FEATURES
Inherent obstruction sensing
External obstruction sensing
Advanced dual gate operation
Sequenced access management
Digital logic control
LED indicators
Warning device
Loop detector inputs
Timer to close
Maximum run timer
Emergency stop button
Maglock control
Gear drive reduction
Control inputs
Radio control
Limit settings
Surge & spike protection
Quick-release disconnect
Fold-down access door
2 year warranty |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Liftmaster SW420 (S3) Manual
Liftmaster SW420 (GL) Manual
|
