ALL-O-MATIC SL 100 Slider -
|
|
Specifications:
UL 325 & UL 991 Approved
Full Five and Seven year Warranty
Motor - 1/2 hp
Gear Box - 10:1
Cover is rotationally molded, indestructible
Dimensions: W:12" - L:17.5" - H:23.5"
Gates up to 35 feet
Gates up to 1000 lbs
Gate speed - 12 inches per second
Operator Weight - 100 lbs
Power off gate release - push open
Fie to Seven Year Warranty:
ALL-O-MATIC, Inc. gate operators are warranted against defects in materials and workmanship for five years Commercial and seven years Residential. Any part, parts or complete unit found to be defective within this period shall, at the manufacturer's option, be repaired or replaced free of charges, F.O.B. our factory.
The above warranty is in lieu of all other warranties, expressed or implied, and shall be considered void if visible evidence implies recommended installation procedures and maintenance instructions were not followed. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Manual
|
ALL-O-MATIC Swinger 300 -
|
|
Specifications:
UL 325 & UL 991 Approved
Full Five and Seven year Warranty
Motor - 1/2 hp
Gear Box - 60:1 with Internal Clutch
Cover is rotationally molded, indestructible
Dimensions: W: 12" - L: 17." - H: 25.5"
Gates up to 18 feet
Gates up to 800 lbs
Operator Weight - 110 lbs
Power off quick release arm
Five to Seven Year Warranty:
ALL-O-MATIC, Inc. gate operators are warranted against defects in materials and workmanship for five years Commercial and seven years Residential. Any part, parts or complete unit found to be defective within this period shall, at the manufacturer's option, be repaired or replaced free of charges, F.O.B. our factory.
The above warranty is in lieu of all other warranties, expressed or implied, and shall be considered void if visible evidence implies recommended installation procedures and maintenance instructions were not followed.
|
|
Click on a picture to
see a larger view. |
Apollo Model 7200ETL -
|
|
| Apollo offers it's heavy duty commercial postmounted slide gate operator in two models the 7200ETL and 7200ETL dual. Both models are easily installed on most existing or new slide gates of up to 30 feet in length and 1000 pounds and are approproate for continuous duty work. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Apollo Model 7300ETL -
|
|
| Apollo offers it's slide gate operator for heavy duty Commercial pad mount operator in two models, the 7300ETL and 7300ETL dual. Both models are easily installed on most existing or new slide gates of up to 30 feet in length and 1000 pounds. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Apollo Model 7500ETL -
|
|
| Apollo offers its slide gate operator for heavy duty residential or commercial slide gate application. 7500ETL is a continuous duty operator with internal limits. The 7500ETL is post mount low profile operator. The 7500ETL will operate slide gates up to 30 feet in length and 1000 pounds. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Apollo Model BA12 -
|
|
| The Apollo BA12 Barrier Arm Operator is designed to handle a barrier arm up to 16 feet in length. |
Supporting
Documents
Product Brochure/Specs
Manual
|
Apollo Models 3500ETL 3600ETL -
|
|
Apollo offers its articulating arm swing gate operators in two models the 3500ETL and 3600ETL (daul). Both models are easily installed on most existing or new swing gate. Both operators have a new arm design that eliminates major pinch points. This operator is perfect for heavy duty commercial or residential continuous operation. This operator has a low profile and is post mounted.
The 3500ETL will operate gates up to 20 feet long and 1000 pounds.
The 3500ETL and 3600ETL (dual) utilizes our advanced circuit board 835/836. The 835 single and the 836 dual circuit boards offer additional inputs for a firebox, output monitor lights, lock, siren and strobe lights. |
Supporting
Documents
Product Brochure/Specs
Manual
|
DC Solutions MADCBB3 -
|
|
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Arm Manual
Mega Arm Brochure
|
DC Solutions MASDCBB3 -
|
|
The MEGA ARM by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for mechanical limit switches, relays and contactors. Arm position is limited by a magnet mounted on the drive shaft which is sensed by two magnetic sensors on the electronics controller. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers). The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.
UNIT OVERVIEW
Fast access - very quick 1 second open/close time.
Built in battery backup - inherent 24 VDC backup power with regulated 24VDC for accessories.
High torque 24 volt Permanent Magnet DC motor.
Full service controller with eight inputs and LED indicators for loops, card reader, radio, etc...
Continuous duty operation toll rated at 10,000 cycles per day for all applications (even during power failures).
Reversible arm direction for right or left handed operation.
Instant Reverse Device (IRD) monitor senses obstructions going open and close.
Automatic open of gate arm when power is lost if desired (With 15 sec. delay selection).
Raise gate input memory will memorize multiple vehicles-ideal for barcode scanners & AVI.
Ability to have arm STOP in close travel if tailgating is sensed at close loop.
Break away mounting design for the 4" x 9 Ft. soft padded aluminum safety arm (yellow).
All rust proof aluminum construction with powder coat baked on enamel.
Molded Polyethylene UV stabilized cover never needs wax or paint (white or colors).
Direct drive gear reducer eliminates many parts that might otherwise fail.
Microprocessor (RISC) based electronics with watch dog reset timer.
State of the art MOSFET motor drive technology, NO contactors or relays.
Dynamic motor braking to preserve arm positioning.
Soft start and stop in open and close travel motions.
No limit switches to fail-uses magnetic (Hall Effect) sensors to monitor arm position.
Maximum Run Timer for motor (MRT) with anti-tamper protection in closing direction.
Each unit configurable as master or slave operator.
Safe 24 VDC low voltage motor and control wiring.
LED diagnostic center for easy on-site trouble shooting.
Closing timer adjustable f |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Sprint Manual
|
DC Solutions MSLDCBB3 -
|
|
The MEGA SLIDE-UL by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for motor relays and contactors. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, etc... Built in regulated 24VDC backed up power provided for accessories (detectors, radio receivers, card readers, mag-lock). Should AC power fail, the unit can run on battery power or be set to auto-open with a 15 second delay. In the unlikely event the unit should be rendered inoperable ( fire, flood, lightning), the drive assembly will disengage to allow the gate to be pushed open by hand (no chain drops or dangerous hand cranks). Operator can be pushed open when either entrapment feature is activated. Finally, its rugged modem design and cutting edge technology will make the MEGA SLIDE-UL the perfect choice for all your slide gate applications.
STANDARD FEATURES
BUILT IN BATTERY BACKUP POWER SOURCE
HIGH TORQUE 1/2 HP 24 VOLT DC MOTOR
MICROPROCESSOR (RISC) CONTROL BOARD
OPEN ON POWER LOSS WITH 15 SEC. DELAY
ANTI-TAIL GATE WITH QUICK CLOSE FEATURE
MOLDED Polyethylene COVER-UV STABLE
IRD SENSES OPEN AND CLOSE OBSTRUCTIONS
RUST PROOF ALUMINUM ALLOY CHASSIS
SOFT START AND STOP WHEN IN MOTION
SPEED 12 INCHES PER SECOND
DYNAMIC MOTOR BRAKING-ELECTRONIC
CONFIGURABLE AS MASTER OR SLAVE
LED INPUT AND DIAGNOSTIC INDICATORS
MOSFET MOTOR DRIVE-NO CONTACTORS
SAFE LOW VOLTAGE CONTROL CIRCUITRY
MAXIMUM RUN TIMER (MRT)
U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
UL-325, UL-991, UL-746C
CLASS, 1,2,3,4.
DESIGN FEATURES
UNIVERSAL CONTROLLER WITH 8 INPUTS
MICROPROCESSOR (RISC) ELECTRONICS
RIGHT OR LEFT HANDED OPERATION
ANTI-TAILGATE & QUICK CLOSE FEATURE
ABILITY TO AUTO OPEN WHEN POWER FAILS
TRANZORB SURGE PROTECTION ON INPUTS
CLOSING TIMER ADJUSTABLE 1-33 SECONDS
PULSE OPEN/CLOSE FOR RESIDENTIAL
ROOM FOR FUTURE OVERDRIVE CPU
LARGE SHELF FOR DETECTORS, BATTERIES
SPECIFICATIONS
1/2 HP PERMANENT MAGNET 24 VDC MOTOR
120/220 VAC AT 4 / 2 AMPS MAX, 50/60 HZ
REGULATED 24VDC 500 MA ACCESSORY POWER
BATTERY BACKUP FOR ACCESSORY POWER
CONTINUOUS DUTY (FREE MOVING LEVEL GATE)
HEAVY DUTY DIRECT DRIVE 10:1 GEAR REDUCER
1000 LBS AT 32 FT (FREE ROLLING & LEVEL)
COVER: BLACK HIGH IMPACT Polyethylene
CHASSIS: 1/4 INCH RUST PROOF ALUMINUM ALLOY
CHASSIS FINISH: BAKED ON POLYESTER POWDER COAT
UHMW CHAIN IDLERS-HEAVY DUTY AND QUIET
CONVENIENT DUPLEX OUTLET (120 VAC)
ON/OFF AC POWER SWITCH
OPTIONS
Heater: 150 Watt Heater Wit |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Slide - UL Manual
Mega Slide Brochure
|
DC Solutions MSLXDCBB3 -
|
|
The MEGA SLIDE-X by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for motor relays and contactors. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, etc... Built in regulated 24VDC backed up power provided for accessories (detectors, radio receivers, card readers, mag-lock). Should AC power fail, the unit can run on battery power or be set to auto-open with a 15 second delay. In the unlikely event the unit should be rendered inoperable ( fire, flood, lightning), the drive assembly will disengage to allow the gate to be pushed open by hand (no chain drops or dangerous hand cranks). Operator can be pushed open when either entrapment feature is activated. Finally, its rugged modem design and cutting edge technology will make the MEGA SLIDE-X the perfect choice for all your slide gate applications.
STANDARD FEATURES
BUILT IN BATTERY BACKUP POWER SOURCE
HIGH TORQUE 1/2 HP 24 VOLT DC MOTOR
DISCONNECT SWITCH ALLOWS GATE TO BE PUSHED OPEN
MICROPROCESSOR (RISC) CONTROL BOARD
OPEN ON POWER LOSS WITH 15 SEC. DELAY
ANTI-TAIL GATE WITH QUICK CLOSE FEATURE
MOLDED POLYETHYLENE COVER-UV STABILIZED
APPEARANCE: ATTRACTIVE MODERN COVER
IRD SENSES OPEN AND CLOSE OBSTRUCTIONS
EXTRA HEAVY DUTY 1/4" STEEL FRAME
SOFT START AND STOP WHEN IN MOTION
SPEED 12 INCHES PER SECOND
DYNAMIC MOTOR BRAKING-ELECTRONIC
CONFIGURABLE AS MASTER OR SLAVE
BRIGHT LED INPUT AND DIAGNOSTIC INDICATORS
MOSFET MOTOR DRIVE-NO CONTACTORS
SAFE LOW VOLTAGE CONTROL CIRCUITRY
MAXIMUM RUN TIMER (MRT)
U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
UL-325, UL-991, UL-746C
CLASS, 1,2,3,4.
DESIGN FEATURES
UNIVERSAL CONTROLLER WITH 8 INPUTS
MICROPROCESSOR (RISC) ELECTRONICS
RIGHT OR LEFT HANDED OPERATION
ANTI-TAILGATE & QUICK CLOSE FEATURE
ABILITY TO AUTO OPEN WHEN POWER FAILS
TRANZORB SURGE PROTECTION ON INPUTS
CLOSING TIMER ADJUSTABLE 1-33 SECONDS
PULSE OPEN/CLOSE CONTROL FOR RESIDENTIAL
ROOM FOR FUTURE OVERDRIVE CPU
LARGE ENCLOSURE FOR DETECTORS, BATTERIES
LARGE AREA IN FRAME TO STORE TWO 34 AMP HR BATTERIES FOR SOLAR POWER APPLICATIONS
SPECIFICATIONS
HIGH TORQUE 1/2 HP 24 VDC MOTOR
110/220 VAC AT 4 / 2 AMPS MAX, 50/60 HZ
REGULATED 24VDC 500 ma ACCESSORY POWER (FIXED ma)
BATTERY BACKUP FOR ACCESSORY POWER
CONTINUOUS DUTY (FREE ROLLING & LEVEL GATE)
GEAR REDUCER: HEAVY DUTY SIZE 60 (10:1) DIRECT DRIVE
1000 LBS AT 32 FT (FREE ROLLING & LEVEL REQUIRED)
COVER: DARK GRAY HIGH IMPACT POLYETHYLENE
CHASSIS: 1/ |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Slide - X Manual
|
DC Solutions MSWDCBB3 -
|
|
The MEGA SWING-UL by DC SOLUTIONS, INC. was made to be unique in the industry through innovative design and solid engineering. Its single State of the Art universal electronics control board eliminates the need for motor relays and contactors. Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, etc... Built in regulated 24VDC backed up power provided for accessories (detectors, radio receivers, card readers, mag-lock). Should AC power fail, the unit can run on battery power or be set to auto-open with a 15 second delay. In the unlikely event the unit should be rendered inoperable (fire, flood, lightning), the drive arm assembly can be disengaged so the gate can be pushed open by hand. Finally, its rugged modern design and cutting edge technology will make the MEGA SWING-UL the perfect choice for all your swing gate applications.
STANDARD FEATURES
BUILT IN BATTERY BACKUP POWER SOURCE
HIGH TORQUE 1/2 HP 24 VOLT DC MOTOR
MICROPROCESSOR (RISC) CONTROL BOARD
OPEN ON POWER LOSS WITH 15 SEC. DELAY
ANTI-TAIL GATE WITH QUICK CLOSE FEATURE
MOLDED Polyethylene COVER-UV STABLE
UNIQUE "CLAM SHELL" COVER DESIGN
IRD SENSES OPEN AND CLOSE OBSTRUCTIONS
RUST PROOF ALUMINUM ALLOY CHASSIS
SOFT START AND STOP WHEN IN MOTION
13-15 SECOND OPEN/CLOSE TIME
DYNAMIC MOTOR BRAKING-ELECTRONIC
CONFIGURABLE AS MASTER OR SLAVE
LED INPUT AND DIAGNOSTIC INDICATORS
MOSFET MOTOR DRIVE-NO CONTACTORS
SAFE LOW VOLTAGE CONTROL CIRCUITRY
MAXIMUM RUN TIMER (MRT)
U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
UL-325, UL-991, UL-746C
CLASS, 1,2,3,4.
DESIGN FEATURES
EMERGENCY RELEASE (HARDENED STAINLESS STEEL)
NON-SCISSOR ARM DESIGN
UNIVERSAL CONTROLLER WITH 8 INPUTS
INPUTS INCLUDE: OPEN, CLOSE, SINGLE BUTTON, SAFETY, FREE EXIT & SHADOW (UNDER GATE LOOP)
MICROPROCESSOR (RISC) ELECTRONICS
RIGHT OR LEFT HANDED OPERATION
ANTI-TAILGATE & QUICK CLOSE FEATURE
ABILITY TO AUTO OPEN WHEN POWER FAILS
TRANZORB SURGE PROTECTION ON INPUTS
CLOSING TIMER ADJUSTABLE 1-33 SECONDS
RELAY MAG-LOCK OR INTERFACE
OPEN/CLOSE 13-15 SECONDS
ROOM FOR FUTURE OVERDRIVE CPU
EXTRA LARGE ENCLOSURE FOR DETECTORS, BATTERIES
SPECIFICATIONS
1/2 HP PERMANENT MAGNET 24 VDC MOTOR
110 1220 VAC AT 4 / 2 AMPS MAX, 50/60 HZ
REGULATED 24VDC 500 MA ACCESSORY POWER
BATTERY BACKUP FOR ACCESSORY POWER
CONTINUOUS DUTY (FREE MOVING LEVEL GATE)
HEAVY DUTY SIZE 80 900:1 RATIO GEAR REDUCER
MAX 600 LBS AT 18 FT
COVER: GREY HIGH IMPACT Polyethylene
CHASSIS: 3/8 INCH T6 ALUMINUM ALLOY
CHASSIS FINISH: GLOSS WHITE POWDER COAT
ALL ALUMINUM DRIVE ARM
PHYSICAL: WEIGHT= 105 LBS. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Mega Swing - UL Manual
Mega Swing - UL Brochure
|
Elite CSW200UL3 -
|
|
Commercial Swing Gate operator for use in high traffic applications,our most popular swing gate operator.
The CSW2000UL3 is designed for high traffic applications such as heavily accessed gated communities and commercial buildings. It is capable of handling gates up to 600 lbs. and 18' at 75 cycles per hour with normal ambient temperatures. The most popular of all swing gate operating systems nationwide, it is designed with the "non-scissor action" arms that greatly reduce the risk of injury.
MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications.
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal.
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance.
Cycles 75 cycles per hour with a 600 pound gate.
Dimensions Length = 20.5in x Width = 15in x Height 28in.
Emergency Release The gate is easily disconnected by turning the release handle. the best option is our DC-1000CSW.
Finish All metal parts are gold zinc plated for rust proof protection.
Gate Length 18 feet maximum gate length.
Motor 1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings.
Output Shaft 2.5 inch cold rolled steel.
Shipping Weight 175 lbs.
Travel Speed 90° opening in 13-15 seconds.
Weight 160 pounds.
Weight Capacity 600 pounds maximum gate weight.
Worm Gear Reduction Two, 30-to-1 worm gears equal a 900-to-1 reduction. Both are lubricated in an oil bath. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
CSW Manual
CSW DC/Surge Manual
CSW Specs Manual
|
Elite Hercules - HCT501103-10 -
|
|
Designed for 10' overhead gates, the smartest choice for low clearance high traffic underground parking garages.
Designed for parking garages, Hercules is carefully engineered to operate without vibration or noise, unlike any other overhead gate operator on the market. Designed with quality in mind, Hercules has features that most companies have not even considered including on their overhead operators. It is equipped with a 40 to 1 gear reducer/box that is lubricated by an oil bath and provides smooth and very quiet operation. To further ensure quiet operation, the Hercules is equipped with four heavy-duty noise isolators. The high quality instant reversing parking gate motor is capable of continuous operational cycles per day and has digital overload motor protection. Hercules has a key release and there are no exposed components, therefore greatly reducing the risk of injury. Since Hercules is only 8 inches thick, up to 10 inches thinner than other overhead operators, it is a better and safer choice for all overhead gates, and the smartest choice for low clearance parking lots.
MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications.
Dimensions 141 in(L) x 19 in(W) x 8 in (H)
Finish All metal parts are gold zinc plated for rust proof protection.
Gear Reducer The C-mounted continous cycle motor is the same 1/2 hp Instant reversing parking gate motor used on most barrier gates. 40-to-1 gear box allows smooth and quiet operation.
Key Release Hercules comes with an emergency release equipped with a security key in case of a power failure.
Noise Isolaters Hercules uses Heavy-Duty rubber attachments to prevent noise and vibration.
Trolley Assembly The Trolley Assembly Operates on 6 UHMW rollers for high performance and reliability. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Hercules 10 Manual
Hercules 10 Specs Manual
|
Elite SL3000UL3 -
|
|
Commercial Slide Gate Operator (1/2 hp) for use in high traffic applications. Capable of continuous cycles daily.
The SL3000UL3™ is smooth and exceptionally quiet. This unit can handle continuous cycles daily with gates up to 1000 lbs. and 37 ft. in length with a traveling speed of 12 inches per second. It is designed for high traffic applications such as heavily accessed gated communities and commercial buildings.
MECHANICAL SPECIFICATIONS
Approval UL and ETL listed to the latest UL325 and UL991 specifications.
Chassis Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal.
Cover High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance.
Dimensions Length = 18in x Width = 19in x Height = 25in
Emergency Release The gate is easily disconnected by turning the release handle. the best option is our DC-1000CSW.
Finish All metal parts are gold zinc plated for rust proof protection.
Gate Length 37 feet maximum gate length.
Motor 1/2 hp, instant reversing, 120VAC, 4 amp, 1625 rpm, with high speed ball bearings.
Output Shaft 1 inch cold rolled steel.
Shipping Weight 130 pounds.
Travel Speed 12 inches per second average gate speed.
Weight 112 pounds.
Weight Capacity 1000 pounds maximum gate weight.
Worm Gear Reduction 30-to-1 worm gear reduction in an oil bath. |
|
Click on a picture to
see a larger view. |
Supporting
Documents
Elite SL3000 Manual (surge)
Elite SL3000 Manual (no surge)
|
FAAC 400 -
|
|
| The Model 400 heavy duty operator is designed specifically for situations needing maximum versatility such as apartment, subdivision, commercial/industrial and residential applications. |
Supporting
Documents
Product Brochure/Specs
Manual
|
FAAC 615 -
|
|
The model 615 barriers are designed for light to moderate duty applications.
Features:
Adjustable hydraulic pressures to control swing
External key-operated manual release
Simple interface with revenue control systems
Powder coated steel cabinet
Versatile Model 455 D control panel
Quiet operation |
FAAC 620 -
|
|
The U.L. Listed model 620 barrier gates are designed for moderate to heavy duty applications.
The 620 is shipped with the model 624 mps control panel and has the following features:
Continuous duty operation
Adjustable hydraulic pressures
4 different operating logics
Pre-assembled counterbalanced system
Automated fan cooling on all models
Pause time seslections
Selectable warning light logic
Quiet operatio
Fast opening time (2 sec. for 8 .5 ft beam) |
Supporting
Documents
Product Brochure/Specs
Manual
|
FAAC 640 -
|
|
The U.L. listed model 640 barrier gates are designed for high traffic situations where longer beams are needed. The 640 is shipped with 624 mps control panel.
Features:
Continuous duty operation
Adjustable hydraulic pressures to control swing
4 different operating logics
Pre-assembled counterbalanced system
Automated fan cooling on all models
Pause time selections
Selectable warning light logic
Quiet operation |
Supporting
Documents
Product Brochure/Specs
Manual
|
FAAC 820 -
|
|
| The model 820 is designed for moderate pulling force. GentleSlide TM motion management oil immersed clutch and electronic clutch which, when properly adjusted, will sense an obstacle to gate travel. Upon sensing an obstacle when the gate is closing, the operator will move the gate to the open position. Sensing an abstacle upon opening will cause the gate to stop. The gate will not move again until an external activation signal is received. |
Supporting
Documents
Manual
|
|
